Menu-> Operations - EBS CPX200N Installation And Programming Manual

CPX200N_20000 directory contains all files related to programming the CPX200N type
device of the serial number 20000. Files names contain date and time of the
operation and its type (recording/reading). The files are recorded with .cmi extension.
7.3.1.7. File -> End
Ends the program operation.
7.3.2. Menu-> Operations
7.3.2.1. Operations -> Read
The function reads the data saved in the memory of GPRS module. Data is exchanged
through the port selected in the section "Select connection type" (see the description
of "Configuration" option below). A correct readout is confirmed with relevant
message. You can save the data downloaded from the equipment in a file (see item
6.3.1.3.), and then use it for other devices.
You can use that function after you define a type and parameters of the connection.
E.g. for local connection the following window is displayed:
where:
Port - serial port that the module is currently connected to.
Access code – service code of the equipment
For detailed description of connection configuration, please refer to item 7.3.1.5.
7.3.2.2. Operations -> Send
The function is similar to the above, but it allows recording data to the memory of
EEPROM module. It is also possible to set internal timer of the device. For the above
you have to check the box "Set the time" and enter a respective date and time. A
correct entry is confirmed with a relevant message.
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL 48 / 106