Programming Date; Restoring A Default Users Code - EBS CPX200N Installation And Programming Manual

4.6. PROGRAMMING DATE

You can change system date here. Date can be changed by the administrator only. 3 beeps
will confirm the successfully entered function.
where:
Administrator code
YY
– Year.
MM
– Month.
DD
– Day.
In any moment you can press
4.7.

RESTORING A DEFAULT USERS CODE

Pressing the PROG button on CPX200N panel for 10s during the connection of the alarm
control unit power supply will delete all programmed users and restore the default admin
and installer code.
Default admin code is: 1111.
Default installer code is: 2222.
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
< Administrator code >
– Administrator Code.
to exit without saving changes.
<YY> <MM> DD>
21 / 106