Gprs; Firmware - EBS CPX200N Installation And Programming Manual

8.9.2.

GPRS

Activating that function (checking the [Activate] box) allows the access to parameters
defining the equipment's response after losing connection with a server.
You can define after what time from the moment the connection was lost the equipment
shall initiate activities aiming at its restoration. The time is selected in a [Reset after] box
and is defined in minutes.
Then, define what activity shall be initiated by the equipment. Select by checking an
appropriate box at the response description:
 Modem reset
 Device reset
In case the equipment lost the GPRS connection, it shall wait for a defined period of time
after the fact was ascertained and then it shall perform stipulated tasks.

8.10. FIRMWARE

The equipment has integrated bootloader that enables module software update. During the
programming all that process information is displayed.
The following activities shall be performed:
 Start configuration wizard,
 Go to wizard's "Firmware" option,
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL 78 / 106