Table of Contents
Advertisement
3.6. KP10 KEYPAD
3.6.1.
Description of Keypad Elements
1. Keypad Buttons
0-9 buttons and * as well as # are intended for keypad and control unit operation. After
first pressing any button, the keypad is backlit. After a few-second idle time, backlight
gets automatically dimmed. In order to make codes easier to remember, buttons are
marked with the alphabet.
2. ALARM LED (red):
Flashing light – means that alarms were present in the system (alarm memory).
Constant light – means that system is in alarm state.
Off – system is operating correctly.
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
Drawing 6. KP10 Keypad
16 / 106
Advertisement
Table of Contents
