Table of Contents
Advertisement
10.1.4.4. CPUNSETPARTITIONS
Format:
Limitations:
Description
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
CPUNSETPARTITIONS=partitions[,password]
You must know the administrator or user password. Can be executed
by ATS, administrator or user. If the command comes from ATS and
was not authorized with a code, enter the password
Disarms the specified partitions. Partitions is a bit-vector specifying
which partitions you want to disarm. Bit 0 is the partition 1, bit 1 is
the partition 2. Setting the bit means that one wants to disarm the
partition. Sending a command with the partition argument equal to
zero, has no sense, since it does not change anything - if the
partitions is 0, the user's password is not checked and the status
returned by the command is equal to EOK. Password is the code of
the user, who performs disarming. The specified partitions will be
armed from the user's id to whome the code belongs. The command
returns:
CPUNSETPARTITIONS=partitionList:EOK
If the command is executed.
which has been disarmed (note that
partitions
from
, if the user does not have permissions to desired
partitions).
CPUNSETPARTITIONS=partitions,password:EFORMAT
If the data format is incorrect (partitions,password are the command
arguments)
CPUNSETPARTITIONS=partitions:EPERMISIONS
If the user with the specified password does not exist
partitionList
is the list of partitions
partitionList
may be different
101 / 106
Advertisement
Table of Contents
