Table of Contents
Advertisement
Drawing 2. Description of screwed connectors of the control unit
3.4. CONFIGURATION OF INPUT LINES
All input lines are fully configurable and can operate as normally closed (NC)) or normally
open (NO) as well as with assigned parameters (EOL-NO or EOL-NC) using 2.2kΩ resistors
or with assigned double parameters (DEOL-NO or DEOL-NC) using 1.1kΩ resistors. Both
resistor types are included in the delivery of the control unit. Various configurations of input
lines are presented in the drawing 3.
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
12 / 106
Advertisement
Table of Contents
