Programmable Parameters; Access; Parameters - EBS CPX200N Installation And Programming Manual

8. PROGRAMMABLE PARAMETERS

Parameters available in configuration wizard were divided into groups: Access, Transmission,
Entrances/Exits, Monitoring, Restrictions, SMS Messages, Connection Control, Firmware.
Each of the groups will be described in detail further on.

8.1. ACCESS

8.1.1.

Parameters

8.1.1.1. Equipment operation mode
Depending on user's preferences, the equipment can operate in one of 4 modes (to
be selected from a drop list):
 GPRS & SMS: GPRS transmission (TCP/IP protocol) in standard and in case of
problems with that connection, automatic switch into SMS mode
 SMS: Transmission only in SMS mode without the attempt of establishing a GPRS
connection
 GPRS: GPRS transmission (TCP/IP protocol) in standard. In case of any problems
with that connection, no remote connection is possible
 No server connection: no transmission with server, remote communication with a
user is possible only via SMS messages
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL 52 / 106