2-9.3 Jfsb3: Memory Turbo Mode; 2-9.4 Ljp1: Lan Controller Select (865G-L Only) - SOLTEK SL-865G Manual

SL-865G / 865G-L

2-9.3 JFSB3: Memory Turbo Mode

JFSB3 is designed on board for improving Memory performance. If you
want to obtain better system performance, you can set JFSB3 2-3 closed
to enable the Memory Turbo Mode. Otherwise, you can set JFSB3 1-2
closed to disable the Memory Turbo Mode.

2-9.4 LJP1: LAN Controller Select (865G-L only)

LJP1 is a 2-pin jumper for enabling or disabling the on-board LAN
Controller. Users can set LJP1 1-2 opened to enable the on-board
LAN Controller so as to set up the LAN driver, or to set LJP1 1-2
closed to disable the on-board LAN Controller. No matter LJP1 is
enabled or disabled, users are free to use an add-on PCI LAN card
for networking.
JFSB3
Memory Turbo Mode
1-2 closed
(default)
1
Turbo Mode Disabled
2-3 closed
1
Turbo Mode Enabled
LJP1:
LAN Controller Select
(865G-L only)
1-2 closed
Disabled
1
(default)
1-2 open
1
Enabled
30