4-6.6.1 Boot Settings Configuration - SOLTEK 86SP2 Manual

4-6.6.1 Boot Settings Configuration

Choose "Boot Settings Configuration" in "Boot Configuration Setup" and
press <Enter>. The following items will appear for onfiguration:
Boot Settings
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait For 'F1' If Error
Hit 'DEL' Message Display
Interrupt 19 Capture
Quick Boot Allows you to enable (default)/ disable quick boot of
Quiet Boot The bootup screen displays normal POST messages
AddOn ROM Display
Mode
Bootup Num-lock Allows you to toggle between On (default) or Off to
Boot Configuration Setup
Enabled
Disabled
Force BIOS
On
Auto
Enabled
Enabled
Disabled
your system. If disabled, BIOS will skip certain tests
whle booting. This will decrease the time needed to
boot the system.
with Disabled selected; the bootup screen displays
OEM Logo instead of POST messages with Enabled
selected.
Choices: Enabled; Disabled
If "Force BIOS" (default) is chosen, the vendor's logo
screen will be followed by the "AddOn ROM" initial screen
(the screen showing the add-on card BIOS message). If
"Keep Current" is chosen, no "Add-On ROM" screen is
followed.
control the state of the NumLock keys when the
system boots. If On, the numeric keypad is in nu-
meric mode. If off, the numeric keypad is in cursor
control mode.
81
Chapter 4 BIOS Setup
Help Item
Configure Settings
during System Boot.