2-8.3 Jp1: Kb /Mouse / Power Button Select; 2-8.4 Jp10: Lan Controller Select (85Mr3-L Only) - SOLTEK 85MR3 Manual

2-8.3 JP1: KB /Mouse / Power Button Select

JP1 is designed to select keyboard/Mouse/Power button as the power-
on controller. Setting JP1 to 1-2 closed will allow users to power on
system by power button while setting JP1 to 2-3 closed will allow users
to power up system by keyboard/Mouse. Yet users still have to choose
the K/B Power-on mode on BIOS. (See Integrated Peripherals" in BIOS
Setup.)

2-8.4 Jp10: LAN Controller Select (85MR3-L only)

JP10 is a 2-pin jumper for enabling or disabling the on-board LAN
Controller. Users can set JP10 OPEN to enable the on-board LAN Con-
troller so as to set up the LAN driver, or to set it CLOSED to disable the
on-board LAN Controller. In such case, users are free to use an add-
on PCI LAN card for networking.
JP1
KB/Mouse/Power
Button Select
1
1-2 closed (default)
To power on by Power
Button
1
2-3 closed
To power on by keyboard
/ Mouse
Jp10
LAN Controller Select
(85MR3-L only)
1
1-2 open
(default)
LAN controller enabled
1
1-2 closed
LAN controller disabled
29
Chapter 2 Hardware Setup