2-3.1 To Install Ddr Sdram Module - SOLTEK 86SP2 Manual

2-3.1 To Install DDR SDRAM Module

• To enable Dual-channel memory function, users should insert totally
identical (size and frequency) DDR module pair into the bank-pair.
• DDR DIMM slot has 184 pins and one notch. Insert a DDR SDRAM
vertically into the 184-pin slot with the notch-to-rib matching.
(2.5V Voltage Key)DDR Notch
DIMM1
DIMM2
2-3.2 To Remove a DIMM
Power off the system first, and then press down the holding latches on
both sides of slot to release the module from the DIMM slot.
184-Pin DIMM Notch Key Definition
DRAM Key Position Voltage Key Position
Module Latch
DIMM1+DIMM2 = Dual Channel Memory
Chapter 2 Hardware Setup
DDR Rib
21