86SP2/86SP2-L
PS/2 Mouse Support Enabled (default), PS/2 mouse is supported. Disabled,
Wait For 'F1' If Error Allows you to hit F1 key when errors occur.
Hit 'DEL' Message
Display
Interrupt 19 Capture Allows option ROMs to trap interrupt 19.
4-6.6.2 Boot Device Priority
Choose "Boot Device Priority" in "Boot Configuration Setup" and press
<Enter>. The bootable devices installed on board will appear and are
allowed to assign the Boot Priority.
Boot Device Priority
1st Boot Device
2nd Boot Device
1st/2nd/3rd Boot
Device
PS/2 Mouse is not supported. If "Auto" is set, the system
will auto detect the PS/2 Mouse.
Choices: Enabled(default); Disabled
The system will show "Press DEL key to run Setup
when enabled.
Choices: Enabled(default); Disabled
Choices: Enabled; Disabled(default)
Boot Device Priority
1st FLOPPY DRIVE
PM-WDC WD400BB-00
Allows you to set (by pressing <Enter>) floppy or
IDE devices already installed to be the 1st/2nd/3rd
boot device.
Choices: Disabled; Device(s) installed
82
Help Item
Configure Settings
during System Boot.