4-6.3.7 Usb Configuration - SOLTEK 86SP2 Manual

4-6.3.7 USB Configuration

1. Choose "USB Configuration" in "Advanced BIOS Features" and
press <Enter>. The following sub-screen will appear for
configuration:
USB Configuration
Module Version - 2.22.5-7.4
USB Devices Enabled :
None
USB Function
Legacy USB Support
Port 64/60 Emulation
USB 2.0 Controller
USB 2.0 Controller Mode
USB Mass Storage Device Config Press Enter
: : Move Enter : Select
F7 : Previous Values
USB Function Allows you to set the USB Function on the USB port
Legacy USB Support Allows you to enable(default) / disable the Legacy
Port 64/60 Emulation Allows you to enable(default) / disable Port 64/60
USB 2.0 Controller Allows you to enable(default)/ disable the USB 2.0
USB 2.0 Controller
Mode
USB Configuration
8 USB Ports
Enabled
Disabled
Enabled
FullSpeed
+/- : Values F10: Save
F8 : Fail-Safe Defaults
(s).
Choices: 8 USB Ports (default); 6 USB Ports ; 4 USB
Ports; 2 USB Ports; Disabled
USB support.
Choices: Enabled(default); Disabled; Auto
Emulation
Choices: Enabled; Disabled(default)
Controller.
Allows you to configure the USB 2.0 Controller Mode.
Choices: FullSpeed; HiSpeed.
69
Chapter 4 BIOS Setup
Help Item
Enable USB host
controllers.
Esc: Exit F1: General Help
F9: Optimized Defaults