2-9.3 Jp1: Kb / Mouse Power On / Wake Up; 2-9.4 Jp10: Lan Controller Select (85Mr3-Rl Only) - SOLTEK 85MR3-R Manual

85MR3-R / 85MR3-RL

2-9.3 Jp1: KB / Mouse Power On / Wake Up

Jp1 is a jumper for user to enable/disable the KB/Mouse Power-On or
Wake-Up function. Setting Jp1 to 1-2 closed will disable this function.
Setting Jp1 to 2-3 closed will enable this function, such that users can
power on system (from system off) by PS/2 KB or Mouse or wake up
system (from Suspend modes) either by PS/2 or USB KB/Mouse.
However, to use this function, users should also enter BIOS setup and
configure the USB Keyboard Power On items, That is, users should
need both Jp1 and the BIOS to execute this function.

2-9.4 Jp10: LAN Controller Select (85MR3-RL only)

Jp10 is a 2-pin jumper for enabling or disabling the on-board LAN
Controller. Users can set Jp10 OPEN to enable the on-board LAN Con-
troller so as to set up the LAN driver, or to set it CLOSED to disable the
on-board LAN Controller. In such case, users are free to use an add-
on PCI LAN card for networking.
Jp1:
KB / Mouse Power On / Wake Up
1-2 closed (default)
KB/Mouse Power On &
1
Wake Up Disabled
2-3 closed
KB/Mouse Power On &
1
Wake Up Enabled
Jp10
LAN Controller Select
(85MR3-RL only)
1
1-2 open
LAN controller enabled
1
1-2 closed
LAN controller disabled
32
(default)