Other Connectors Configuration; 2-10.1 On Board Fan Connectors - SOLTEK 86SP2 Manual

2-10 Other Connectors Configuration

This section lists out all connectors configurations for users' reference.

2-10.1 On Board Fan Connectors

PS/2 Mouse
JKB1
(on top)
1
Fan1
USB0 PS/2 K/B (underside)
(middle)
USB1 (underside)
Main
+12V Power
RJ45 Power
(on top)
USB2 (middle)
USB3 (underside)
JAUD1
CD-IN1
1
ALC
650
LJP1
1
RTL
8101L
Winbond
W83627HF
RT2
Both Sensor and No-sensor Fan Connectors support CPU/AGP/Sys-
tem/Case cooling fan with +12V mode. A Hardware Monitor chipset is
on board, with which users can install a Hardware Monitor Utility and
read the fan speed transmitted from the sensor fan. Otherwise, users
can read the fan speed from the "Hardware Monitor Status" via BIOS.
A running Fan will send out 2 electric pulses per rotation of its fan
blade. A Sensor Fan Connector will count the electric pulses and send
the information to the System Hardware Monitor which in turn will work
out the fan rotation speed and display it on screen.
Fan2
JFSB1
1 JFSB2
Fan4
AGP 8X/4X
PCI 1 IDE2 IDE1
PCI 2
Intel
PCI 3 ICH5
ATA1 ATA2
PCI 4
NJ1
JBAT1
1
PCI 5
Li
BIOS
Battery
FD1
Fan3 USB2 USB3
1 1 1
Chapter 2 Hardware Setup
Sensor
+12V
GND
Sensor Conn.
Fan Connector
Fan2, yellow, sensor
Fan Connector
Fan1, yellow, sensor
Fan Connector
Fan4, white, no sensor
Fan Connector
Fan3, yellow, sensor
31
Void
+12V
GND
No Sensor