Introduction; Package Contents; Product Overview - Thermo Scientific Smart-Vue Installation Manual

Introduction

Package contents

Product overview

4 Smart-Vue CO and Temperature Module Installation Guide
2
Congratulations and thank you for choosing the Thermo Scientific
Smart-Vue TM wireless monitoring CO
This document covers Smart-Vue end-point modules for use with the
Thermo Scientific CO
module.
This guide describes how to get your new Smart-Vue end-point module up
and running quickly. Detailed configuration instructions and software
settings are provided in the complete Thermo Scientific Smart-Vue Software
User Manual provided with your product.
• Smart-Vue wireless monitoring end-point module with battery – 3.6V
Lithium, 3600 mA (p/n SV503-500-LSB)
• Dual end-point module with CO
• 4-wire flat ribbon cable to connect Smart-Vue with sensor end-point
module
• Calibration certificate (if purchased with calibration option)
downloadable on-line directly from within Smart-Vue Client software
• Smart-Vue mounting kit with plastic holder, magnet, screws, cable ties,
plastic cable holders and Velcro
• Documentation CD-ROM
Note: The Smart-Vue end-point module and its wireless features are
powered by the unit's battery. Although the AC adapter plugs into the
Smart-Vue end-point module, this power is used only by the external
CO /temperature sensor.
2
The Smart-Vue CO wireless end-point module is a dual-function device
2
that monitors both CO
module is designed to be placed on the outside of an incubator and
connected to the dual sensor by a four-pin ribbon cable. The dual sensor is
usually placed inside the incubator via an access port.
and temperature end-point module.
2
detector/temperature monitoring end-point
2
and temperature sensors
2
®
concentration and temperature. This end-point
2
Introduction
Thermo Fisher Scientific