Download Print this page
Thermo Scientific Orion Versa Star Instruction Sheet
Thermo Scientific Orion Versa Star Instruction Sheet

Thermo Scientific Orion Versa Star Instruction Sheet

Conductivity/tds/salinity/resistivity temperature module
Hide thumbs Also See for Orion Versa Star:

Advertisement

Quick Links

Data Log
V
s
meters offer a 2000 point data log. Each point
ersa
tar
includes measurements from one to four channels with
the date and time. When the data log function is turned
on in the Instrument Settings setup menu, the read type
determines how the displayed measurements are saved
to the data log.
1. In the measurement mode, press the setup key.
2. Press the or key to highlight Log View and press
the f3 (Select) key.
3. Press the or key to highlight Data Log.
4. Press the
or
key to highlight View and press the
f3 (Select) key.
5. Press the
or
key to highlight a point and press the
enter key to view detailed data for that point. Press the
or key to scroll through additional data log points.
6. Press the measure (esc) key to return to the
measurement mode.
thermoscientific.com/water
© 2014 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher
Scientific and its subsidiaries.
Water Analysis Instruments
North America
India
Toll Free: 1-800-225-1480
Tel: (91) 22-4157-8800
Tel: 1-978-232-6000
wai.asia@thermofisher.com
info.water@thermo.com
China
Netherlands
Tel: (86) 21-68654588
Tel: (31) 020-4936270
wai.asia@thermofisher.com
info.water.uk@thermo.com
Japan
Singapore
Tel: (81) 045-453-9175
Tel: (65) 6778-6876
wai.asia@thermofisher.com
wai.asia@thermofisher.com
IS-68X591203-B 0514
Calibration Log
The calibration log contains up to the ten most recent
calibrations per pH, RmV, ORP, ISE, incremental
technique, conductivity, DO and RDO parameter.
1. In the measurement mode, press the setup key.
2. Press the or key to highlight Log View and press
the f3 (Select) key.
3. Press the or key to highlight Cal Log.
4. Press the
or
key to highlight the desired
calibration parameter and press the f3 (Select) key.
5. Press the
or
key to view each calibration for the
selected parameter.
6. Press the measure (esc) key to return to the
measurement mode.
Australia
Tel: (613) 9757-4300
in Australia (1300) 735-295
InfoWaterAU@thermofisher.com
Thermo Scientific Orion
V
s
Conductivity/TDS/Salinity/Resistivity Temperature Module
ersa
tar
This literature provides basic instructions on operating the Thermo Scientific
V
s
conductivity measurement module is installed. For comprehensive information on meter and module system
ersa
tar
setup, operation and advanced features, please refer to the V
literature CD or www.thermoscientific.com/water.
Preparation
1. Prepare the universal power adapter, install the meter-attached
electrode stand and verify that the conductivity module is connected
to the meter. If it is not connected, insert the module into an available
channel on the back of the meter.
2. Prepare the electrodes as instructed in the electrode user manuals.
For improved movement and control, place the electrodes into the
electrode stand.
3. Connect the conductivity probe cable to the 8 pin MiniDIN input on
the module.
Orion
V
s
meter when the
ersa
tar
s
user manual available on the V
s
ersa
tar
ersa
tar
Conductivity Module
8 pin
MiniDIN

Advertisement

loading

Summary of Contents for Thermo Scientific Orion Versa Star

  • Page 1 Conductivity/TDS/Salinity/Resistivity Temperature Module ersa 6. Press the measure (esc) key to return to the measurement mode. This literature provides basic instructions on operating the Thermo Scientific ™ Orion ™ ™ meter when the ersa conductivity measurement module is installed.
  • Page 2 ™ ™ ™ 4. If using the Thermo Scientific Orion Star stirrer 6. The meter will display the calibration summary and 4. Remove the electrodes from the sample, rinse, dry and Averaging Off, Automatic Smart place into the next sample.