Recommended Order For Installing End-Point Modules - Thermo Scientific Smart-Vue Installation Manual

Recommended order for
installing end-point
10 Smart-Vue CO and Temperature Module Installation Guide
2
In addition to placing your Smart-Vue end-point module as described above
for best individual wireless performance, you may also optimize overall
network performance by proceeding as follows when installing multiple
modules
end-point modules:
1. Examine the general layout of your site to determine the placement
of your Smart-Vue end-point modules. The extent of your
pre-installation site survey depends on the number of end-point
modules to install. Feel free to contact your sales representative for
more information on this topic.
2. Place all end-point modules in their final locations before running
wireless setup (described in Activating the end-point module
(automatic wireless setup) on pg. 14).
3. Begin activation by pressing on the end-point module's push-button
for 3 seconds (until "Searching" is displayed on the screen), starting
with the end-point modules closest to your receiver, working your
way "out" in concentric circles. This enables each Smart-Vue
end-point module to establish the optimal connection to your
receiver.
Figure 5. Start installation with end-point modules closest to your
receiver and work your way "out" in concentric circles
Installation procedure
Thermo Fisher Scientific