Requirements And Recommendations - Thermo Scientific Smart-Vue Installation Manual

C02/temperature module
Hide thumbs Also See for Smart-Vue:
Table of Contents

Advertisement

Requirements and
recommendations
8
Smart-Vue CO
and Temperature Module Installation Guide
2
For the purposes of this installation guide we assume that:
Smart-Vue Server/Smart-Vue Client software is installed and configured
on your computer, and you have appropriate access rights to configure
devices.
A Thermo Scientific receiver is installed and functioning on your
computer or network.
The personal computer (PC) running Smart-Vue Server software runs
continuously, 24/7/365, and should be connected to an Uninterruptible
Power Supply (UPS) that protects against power surges and provides
power to back up the PC and components.
The AC adapter used for your serial receiver (if applicable) should also
be plugged into a UPS.
A UPS is also recommended as a power back-up for your
communication/network systems.
Weekly manual system testing (e.g., temporarily remove a sensor to
verify the communications system is working) should be performed as
defined in your Standard Operating Procedure (SOP).
Recommended maintenance procedures should be followed.
If you are storing cold products, Thermo Fisher Scientific recommends
use of a back-up cooling system (e.g., CO
chamber temperature below the critical level should a power failure
occur. Contact your local sales representative for more information.
Thermo Fisher Scientific recommends Installation and Operational
Qualifications (IQ/OQ) be performed before initial use. Contact your
local sales representative for more information.
For timely notification of an emergency/alarm, it is critical to establish
primary, secondary and tertiary call-out procedures with escalation so
contact is not dependent on reaching one individual. Ideally, ultimate
contact is with a security department or company with 24/7
monitoring.
End-point modules with internal probes should not be placed in
cold-rooms.
Please see the relevant product manuals for details on installing Smart-Vue
receivers and Smart-Vue Server/Smart-Vue Client software.
What is a Smart-Vue wireless end-point module?
or LN
) to maintain freezer
2
2
Thermo Fisher Scientific

Advertisement

Table of Contents
loading

Table of Contents