Software configuration
Setting high and low
alarm levels
Thermo Fisher Scientific
The CO
and temperature sensors each have different Alarm settings. Use
2
the fields and buttons on the Alarm settings tab to configure the behavior of
your sensors, for example:
1. For the CO
sensor, set the high and low alarm limits, pre-alarm
2
values and the delay to wait before an alarm is sent:
Figure 17. F11 ==> Alarm settings tab for CO
2. For the temperature sensor, set the high and low alarm limits,
pre-alarm values, and the delay to wait before an alarm is sent:
Figure 18. F11 ==> Alarm settings tab for temperature sensor
3. Click on Close ==> Yes ==> OK to save your settings.
Please see the Thermo Scientific Smart-Vue Software User Manual for more
details on these and other important features. Click on Help ==> User
Manual ( ) to open the PDF file directly.
Smart-Vue CO
and Temperature Module Installation Guide
2
Click on up/down
arrows to set.
Toggle On button
to activate/deactivate
sensor
2
21