Preparing Mounting Kit With A Magnet (Optional) - Thermo Scientific Smart-Vue Installation Manual

C02/temperature module

Hide thumbs Also See for Smart-Vue:

Table of Contents

Installation procedure

Preparing mounting kit

with a magnet (optional)

Thermo Fisher Scientific

Your Smart-Vue end-point module includes a plastic holder so you can

mount the device easily on various surfaces. In addition to the provided

screws, you will also find a magnetic pad with adhesive backing that you can

use to adhere the holder to most metal surfaces easily.

1. Clean the back of the holder with a mild cleanser or alcohol.

2. Remove the protection from the adhesive pad on the magnet, and

place the magnet on the back of the holder.

3. Place the holder and magnet down on a flat surface and press

down strongly for 30 seconds to firmly attach the magnet.

Smart-Vue CO

and Temperature Module Installation Guide

Table of Contents