Aachc0 - ICP DAS USA PIR-130-AC User Manual

2.27 @AACHC0

Description:
This command is used to clear the status of a Latched High Alarm for a specified module.
Syntax:
@AACHC0[CHKSUM](CR)
@ Delimiter character
AA The address of the module to be cleared in hexadecimal format (00 to FF)
CHC0 The command to clear the status of the Latched High Alarm.
Response:
Valid Command:
Invalid Command:
! Delimiter character to indicate that the command was valid
? Delimiter character to indicate that the command was invalid
AA The address of the responding module in hexadecimal format (00 to FF)
There will be no response if the command syntax is incorrect, there is a communication error, or
there is no module with the specified address.
Examples:
Command: @03CHC0
Clears the status of the Latched High Alarm for module 03, and returns a response
indicating that the command was valid.
Related Commands:
Section 2.24 @AAEAT, Section 2.25 @AAHI(Data), Section 2.26 @AADA, Section 2.28 @AARH,
Section 2.29 @AARAO
PIR-130-AC/DC User Manual Ver. 1.4.0, 2020/07/28
!AA[CHKSUM](CR)
?AA[CHKSUM](CR)
Response: !03
70/93