ICP DAS USA PIR-130-AC User Manual page 39

Command: $01LC4C0
Reads the Active Delay Time for the PIR Relay Output channel of module 01 and
returns a response indicating that the command was valid, with a value of 0BB8
meaning that the Active Delay Time is 3000 milliseconds. The PIR Relay Output
channel will be active for 3000 milliseconds after the module is powered on.
Command: $01LC3C00BB9
Attempts to set the Active Delay Time for the PIR Relay Output channel of module 01
to 0x0BB9 (3001 milliseconds), but the module returns a response indicating that the
command was invalid because the value for the Active Delay Time was not within the
valid range.
Related Commands:
Section 2.11 $AALC4C0
PIR-130-AC/DC User Manual Ver. 1.4.0, 2020/07/28
Response: !010BB8
Response: ?01
39/93