ICP DAS USA PIR-130-AC User Manual page 43

Examples:
Command: $01LC5C00
Sets the Luminance Value for the PIR Sensor on channel 0 of module 01 to a value of 0
meaning that the Luminance value is disabled, and the module returns a response
indicating that the command was valid.
Command: $01LC5C05
Attempts to set the Luminance Value for the PIR Sensor on channel 0 of module 01 to
a value of 5, but the module returns a response indicating that the command was
invalid because the value is not within the valid range.
Command: $01LC6C0
Reads the Luminance Value for the PIR Sensor on channel 0 of module 01 and returns
a response indicating that the command was valid, with a value of 1, meaning that the
Luminance Value is 100 Lux
Related Commands:
Section 2.13 $AALC6C0
PIR-130-AC/DC User Manual Ver. 1.4.0, 2020/07/28
Response: !01
Response: ?01
Response: >011
43/93