ICP DAS USA PIR-130-AC User Manual page 61

Examples:
Command: ~02D02
Sets the PIR Relay Output signal for module 02 to 02, which denotes that the PIR
Relay Output channel is in inactive mode, and returns a response indicating that the
command was valid.
Command: ~02D
Reads the status of the PIR Relay Output signal for module 02 and returns a
response indicating that the command was valid, with a value of 02, which denotes
that the PIR Relay Output channel is in inactive mode.
Command: ~02D07
Attempts to set the Relay Output signal for module 02 to 07, but returns a response
indicating that the command was invalid because the output value was not within the
valid range.
Related Commands:
Section 2.20 ~AAD
PIR-130-AC/DC User Manual Ver. 1.4.0, 2020/07/28
Response: !02
Response: !0202
Response: ?02
61/93