Hardware Installation - ICP DAS USA PIR-130-AC User Manual

1.8 Hardware Installation

Installation Tips
Avoid installing the PIR-130 in areas where it will face direct or reflected sunlight.

Avoid installing the PIR-130 in areas where the environmental temperature may

change rapidly.
Ensure that the PIR-130 is located at least one meter away from the nearest

fluorescent light so as to avoid interference.
Ensure that there are no obstructions in the field of view.

Installation Instructions
1. Position the Mounting Plate in the desired location. Mark the positions of the two
screw holes and a 10 mm hole, as indicated below.
PIR-130-AC/DC User Manual Ver. 1.4.0, 2020/07/28
16/93