ICP DAS USA PIR-130-AC User Manual page 47

Examples:
Command: $01LC7C000
Sets the PIR Relay Output ON Time value for channel 0 of module 01 to 00, meaning
that the ON Time will be 2 seconds, and the module returns a response indicating that
the command was valid.
Command: $01LC8C0
Reads the PIR Relay Output ON Time value for channel 0 of module 01, and the
module returns a response indicating that the command was valid, with a value of 00
meaning that the ON Time will be 2 seconds.
Command: $01LC7C100
Attempts to set the PIR Relay Output ON Time value for channel 1 of module 01 to 00,
but the module returns a response indicating that the command was invalid because
channel 1 does not exist on the PIR-130 module.
Related Commands:
Section 2.15 $AALC8C0
PIR-130-AC/DC User Manual Ver. 1.4.0, 2020/07/28
Response: !01
Response: >0100
Response: ?01
47/93