Troubleshooting
Faults with fault message
6.5.1 Procedure for fault messages
Operating Instructions SP Dual compact | B1500319_en
If a fault occurs on the boiler, it will be shown on the display.
If the fault is acknowledged, although it has not been rectified, the window with the
associated fault can be reopened as follows:
Open error display
System menu
Diagnostics
The error display lists all current faults
❒ Open by tapping the listed fault
❒ The "Message" tab displays the current fault.
❒ Press the "Error resolution" tab to view possible causes and troubleshooting
procedures
❒ Tap the Cancel icon to close the current fault and display the fault list
❒ Tap the Cancel icon again and confirm that you have read all of the errors to
return to the basic display
➥ The boiler is in the previously set mode
Current fault list
6
79
Need help?
Do you have a question about the SP Dual compact 15 and is the answer not in the manual?