Heat Up Firewood Manually - Fröling SP Dual compact 15 Operating Instructions Manual

4

4.5 Heat up firewood manually

30
❒ Open the insulated door and the fuel loading door
❒ Check the ash level in the combustion chamber and clean if necessary
➥ Recommendation: Do not remove the ash in the combustion chamber each
time you heat up the boiler, only when the middle row of holes in the cladding
plates is no longer visible. This protects the combustion chamber and makes
the heating-up process more efficient.
❒ Add one layer of firewood
➥ Use firewood with a length of approximately 50 cm and arrange it lengthwise
➥ Do not completely cover the flame slot (A).
❒ Place some scrunched-up paper at the front against the fuel loading door
❒ Cover the first layer of firewood with cardboard
❒ Fill the fuel loading chamber in accordance with the output
⇨ See "Determining the right amount of fuel" [page 28]
Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
Operating the system
Heat up firewood manually