Select Information Displays - Fröling SP Dual compact 15 Operating Instructions Manual

Operating the system
Operate the boiler using the touch display

4.7.2 Select information displays

Operating Instructions SP Dual compact | B1500319_en
Tapping on the freely selectable information displays in the basic display opens the
respective menu. The following options are available depending on the system
configuration:
Menu Selection
Boiler Empty ash in
Temperatures
Calorific value heat
exchanger
1)
Operation hours
Outside air Temperatures
temperature
Boiler 2 Temperatures
Solar Temperatures
Pellets Remaining pellet
amount in store room
Heating Temperatures
circuit 01 –
18
DHW tank Temperatures
01 – 08
Storage tank Temperatures
01 – 04
3 temperature
sensors
1)
4 temperature
sensors
1)
Circulation Temperatures
pump
Icon Description
Display of the remaining heating hours until
the message "Ash box full, please empty"
appears.
Display of boiler und flue gas temperature
Display of boiler and flue gas temperature
before or after the calorific value heat
exchanger.
Display of the operating hours and the
operating hours since last maintenance.
Display of the current outside air temperature.
Display of the temperature of the secondary
boiler and the status of the burner relay
Display of the collector temperature and
control of the collector pump.
Display of the remaining amount of pellets in
storeroom.
Display of the actual flow temperature and
flow temperature setpoint of the respective
heating circuit.
Display of the current DHW tank temperature
and control of DHW tank pump of the
respective DHW tank.
Display of storage tank temperature, top and
bottom
Display of storage tank temperature, top,
middle and bottom.
Display of storage tank temperature top, store
sensor 2, store sensor 3 and bottom.
Display of the status at the flow sensor (if
present) and the current circulation return
temperature.
4
39