Switch Heating Circuit Mode; Lock Display/Switch User Level - Fröling SP Dual compact 15 Operating Instructions Manual

4

4.7.12 Switch heating circuit mode

4.7.13 Lock display/switch user level

46
NOTICE! If this selection is not configured in the information display in the basic
display, open the components in the system menu.
Otherwise, the room temperature can be adjusted directly on the remote control/room
console.
Tap on the mode icon in the menu of the respective heating circuit to change the
mode.
Procedure
For safety reasons individual parameters are only visible at specific operating levels.
To change to another level it is necessary to enter the relevant user code.
❒ Tap on the icon for the user level in the upper area of the basic display and enter
the code.
Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
Operate the boiler using the touch display
Icon
OFF The heating circuit is switched off. Frost
protection remains active!
Auto The heating circuit is controlled according
to the set time program.
Party The heating circuit is regulated before the
start of the next heating time.
To cancel this function prematurely,
activate another mode/function.
Setback The heating circuit is regulated to the set
mode setback temperature until the start of the
next heating time.
To cancel this function prematurely,
activate another mode/function.
Extra heating The heating circuit is regulated to the set
room temperature with no time limitation.
To cancel this function prematurely,
activate another mode/function.
Continuous The heating circuit is regulated to the set
setback setback temperature until activation of
mode another mode/function.
Operating the system
Description