Mounting In The Beam Tower - Optex AX-100TFR Installation Instructions Manual

Fix the chassis on the pole.
4
Detector 2
M4×30 screw
U-bracket
(supplied)
(supplied)
3-3

MOUNTING IN THE BEAM TOWER

Mounting inside optional beam tower.
Remove the cover from the detector.
1
Loosen the main unit fixing screw and remove the
2
main unit from the back box.
Loosen the main unit
fixing screw.
Cables are connected between the back box and the
main unit. Do not exert an excessive amount of force
on the cables. Handle the main unit with care.
M4×30
screw
(supplied)
Detector 1
Caution
5
Tighten the
back box lock screw.
After mounting the chassis, wiggle the tamper
bushing with your thumb and forefinger to ensure the
tamper works properly.
Remove the harness retainer plate.
3
Main unit
Harness retainer
plate (sticker)
- 7 -
Caution