Introduction; Before Your Operation - Optex AX-100TFR Installation Instructions Manual

1

INTRODUCTION

1-1

BEFORE YOUR OPERATION

• Read this instruction carefully prior to installation.
• After reading, store this instruction carefully in an easily accessible place for reference.
• This instruction uses the following warning indications for correct use of the product, harm to you or other people
and damage to your assets, which are described below. Be sure to understand the description before reading the
rest of this instruction.
Failure to follow the instructions provided with this indication and improper handling may cause
Warning
death or serious injury.
Failure to follow the instructions provided with this indication and improper handling may cause
Caution
injury and/or property damage.
This symbol indicates prohibition. The specific prohibited action is provided in and/or around the figure.
This symbol requires an action or gives an instruction.
Do not use the product for purposes other than the detection of moving objects such as people and vehicles.
Do not use the product to activate a shutter, etc., which may cause an accident.
Do not touch the unit base or power terminals of the product with a wet hand (do not touch when the
product is wet with rain, etc.). It may cause electric shock.
Never attempt to disassemble or repair the product. It may cause fire or damage to the devices.
Do not use batteries other than those specified.
Specified batteries: Four LSH20 batteries manufactured by SAFT
Do not use batteries that have different levels of power remaining (i.e., new and used batteries).
Not observing the above may result in an explosion, leakage of electrolyte, emission of toxic gases or other
outcomes that may be harmful to people and property.
[Handling of Batteries]
Fire, explosion and severe burn hazard. Do not recharge, short circuit, crush, disassemble, heat above
100°C (212°F), incinerate, or expose contents to water.
Do not solder directly to the cell.
Do not pour water over the product with a bucket, hose, etc. The water may enter, which may cause damage to the
devices.
Clean and check the product periodically for safe use. If any problem is found, do not attempt to use the
product as it is and have the product repaired by a professional engineer or electrician.
Warning
Caution
- 2 -