Extreme Networks ExtremeWireless AP510e Installation Manual page 38

Install the AIO-DQ15021-RPSMA Antenna
Confirm that the mounting hardware shipped with the antenna as listed in the table
below.
Note
The AIO-DQ15021-RPSMA antenna is only supported on the AP510e. It is
supported on ExtremeCloud™ IQ Controller and it is intended for indoor
stadiums and arenas for a campus mode deployment only. It is available in
US and Canada only and only in 5G.
Table 15: Mounting hardware
Quanti
ty
2
1
2
2
2
2
2
8
8
4
2
4
4
The AIO-DQ15021-N ships with an articulating mount for mast and wall installation. If
you install on a wall, then use wall anchors or molly bolts so the antenna is secure.
Caution
Do not tighten or tamper with the cable entry glands on the antenna. This
antenna is water proofed to IP67 specifications. Tampering with or tightening
the cable entry glands damages the antenna water proofing and voids the
warranty.
About This Task
Install an internal antenna if you need greater control over Wi-Fi coverage or if you need
to customize your coverage area.
38 ExtremeWireless™ AP510e
Item
Bracket, Flange
Bracket, Linkage
5/16 in Flat Washer
5/16 in Lock Washer
5/16 in x 1-5/8 in Hex Head Bolt
5/16 in Nut
Double Serrated Lock Washer
1/4 in Flat Washer
1/4 in Lock Washer
1/4 in Nut
Clamp
Expansion Anchor
1/4 in x 1-3/4 in Hex Head Bolt
Install the Access Point