Mount the access point to a Beam
Procedure
1. Attach the beam clip accessory, BRKT-000147A-01 to the main mounting bracket by
placing it between the center hinges of the main mounting bracket.
Figure 17: Beam clip accessory, BRKT-000147A-01
2. Using a twisting motion between the main mounting bracket hinges, attach the
beam clip accessory
Figure 18: Attaching the beam clip accessory to the main mounting bracket
3. Attach the main mounting bracket with the beam clip accessory to the access point.
36
ExtremeWireless™ AP510e
Install the Access Point