Extreme Networks ExtremeWireless AP510e Installation Manual page 27

Install the Access Point
Procedure
1. Attach the flat metal easy-attach adaptor to the main mounting bracket. Keep the
easy-attach adaptor to the center of the main mounting bracket's hinges, push and
rotate it.
Figure 11: Attaching the optional flat metal easy-attach adaptor to the main
mounting bracket
2. Use the easy-attach adaptor's end holes as a template to mark the attachment
holes.
3. Drill two holes on the wall where you want to mount the access point.
4. Attach the main mounting bracket with the easy-attach adaptor to the access point.
Mount the AP onto a wall using the Main Mounting
Bracket and the Flat Metal Easy-Attach adaptor
ExtremeWireless™ AP510e 27