Table of Contents
Advertisement
Install the Access Point
Figure 7: Mounting the access point onto the main mounting bracket
6. Attach the security torx locking screw to keep the main mounting bracket in place.
For more information, see
Install a Security Torx Locking Screw
Details about how to install the security torx locking screw on the access point.
About This Task
The security torx locking screw is used to prevent the access point from being removed
from the main mounting bracket (#37201). There are two security lock screw holes on
the rear of the access point. Follow this procedure to install the security torx locking
screw using one of the security lock holes on the access point.
Note
Perform this task after the access point is attached to the main mounting
bracket on a drywall or wood wall.
Mount the access point to a wall using the Main
Install a Security Torx Locking Screw
Mounting Bracket
on page 23.
ExtremeWireless™ AP510e
23
Advertisement
Table of Contents
