Table of Contents
Advertisement
Install the Access Point
4. Align the access point against the screw heads and slide it down.
Ensure that the access point is secured in place and tightened.
5. If the access point is loose, unmount the access point, and decrease the distance
between the screw heads and the wall.
6. Remount the access point.
Mount to a Suspended/Drop Ceiling
About This Task
For suspended ceiling or drop ceiling installation, the main mounting bracket is used
directly on the T-bar. If there is a ceiling tile protrusion, the optional T-bar adapter is
attached to the main mounting bracket prior to T-bar installation.
The access point may be mounted to a suspended or a drop ceiling using:
•
#37201, stainless-steel main mounting bracket to a flat 15/16 in. wide T-bar, with flat
ceiling tiles
•
#37201, stainless-steel main mounting bracket with KT-135628-01 adapter to a flat
T-bar
•
#37211, WS-MBI-DCFLUSH bracket to a flat T-bar, with flat ceiling tiles
•
#30518, WS-MBI-DCMTR01 bracket to a T-bar
Mount the access point using the Main Mounting Bracket to a Flat T-bar
About This Task
The access point can be mounted on a flat T-bar using the main mounting bracket that
is shipped with the unit.
Pre-Installation checklist:
•
T-bar width can be either 9/16" (15 mm) or 15/16" (24 mm).
•
T-bar bottom must be flat all the way across.
•
T-bar minimum base thickness: N/A; must be structurally sound.
•
T-bar maximum base thickness: 0.055".
•
Ceiling tile must be flat all the way across.
Procedure
1. Attach the main mounting bracket to the access point. To know how to attach the
main mounting bracket to the access point, see
mounting
2. Remove the ceiling tiles, push and rotate the main mounting bracket onto the T-bar
in such a way that the center angled locking tabs of the main bracket gets attached
to the T-bar.
3. Hold the access point and rock it back and forth to ensure it is securely mounted.
Note
When installing the access point, the "E" logo on it must be pointing up.
bracket.
Mount to a Suspended/Drop Ceiling
Mounting the AP onto the main
ExtremeWireless™ AP510e
29
Advertisement
Table of Contents
