Table of Contents
Advertisement
Install the Access Point
Procedure
1. Remove the ceiling panels around the drop ceiling T-bar rail.
2. Open the movable sliding part of the DCMTR01 bracket to give the stationary and
slider T-bar more space.
Figure 15: DCMTR01 bracket parts
Label
1
2
3. Hook the stationary end of the DCMTR01 bracket onto the T-bar.
4. Tilt the T-bar up slightly in such a way that you are holding the stationary and
movable sides of the bracket.
5. Squeeze the bracket parts together until you hear the T-bar locking tab click into
place.
Mounting the AP using the WS-MBI-DCMTR01 Bracket
Description
T-bar
Movable sliding part of the DCMTR01
bracket
ExtremeWireless™ AP510e
33
Advertisement
Table of Contents
