Table of Contents
Advertisement
Install the Access Point
4. Place the beam clip accessory on a beam in such a way that there is enough space
between the screw and clamp to be tightened.
Figure 19: Attaching the beam clip accessory to the beam
5. Use the screw and clamp on the top of the beam clip accessory to secure the access
point in place on the beam.
6. Insert the Ethernet plug into the LAN port.
Install the AIO-DQ15021-RPSMA Antenna
Before You Begin
Install the AIO-DQ15021-N in accordance with all applicable local and national electrical
code guidelines. Be familiar with the guidelines in your area before you install the
antenna.
Read the
antenna's location.
Technical specifications
Install the AIO-DQ15021-RPSMA Antenna
and
Radiation patterns
as they can determine the
ExtremeWireless™ AP510e
37
Advertisement
Table of Contents
