Enable Ide Sata Function In System Bios - SOLTEK NF4-754RL Manual

SL-NF4-754RL

5-2. Enable IDE SATA function in System BIOS

1. Start the system, press < Delete > key to enter BIOS Setup. Choose
"Integrated Peripherals" and select "IDE function Setup", then press
enter. The IDE function Setup window appears.
OnChip IDE Channel0
Primary Master PIO
Primary Slave
Primary Master UDMA
Primary Slave UDMA
OnChip IDE Channel1
Secondary Master PIO
Secondary Slave PIO
Secondary Master UDMA
Secondary Slave UDMA
IDE DMA transfer access
Serial-ATA 1
Serial-ATA 2
IDE Prefetch Mode
On-Chip IDE Channel
Serial-ATA1/2 To enable Serial-ATA interface 1/2. SATA 1 inter-
2. Choose "Integrated Peripherals" again and select "RAID Config", then
press enter. The RAID Config window appears.
RAID Enable
x IDE Primary Master RAID
x IDE Primary Slave RAID
x IDE Secondary Slave RAID
x IDE Secondary Master RAID
x SATA 1 Primary RAID
x SATA 1 Secondary RAID
x SATA 2 Primary RAID
x SATA 2 Secondary RAID
RAID Enable To enable the RAID interface.
IDE Primary/Second-
ary Master/Slave RAID
SATA 1/2 Primary/
Secondary RAID
3. Then press F10 to save the change and exit the BIOS. The PC reboots.
Phoenix - AwardBIOS CMOS Setup Utility
IDE Function Setup
PIO
To enable IDE channel.
0/1
face controls 2 SATA connectors. SATA 2 interface
controls another 2 SATA connectors.
RAID Config
If RAID interface is enabled, you should enable the
IDE Primary/Secondary Master/Slave RAID.
If RAID interface is enabled, you should enable the
SATA 1/2 Primary/Secondary RAID.
Chapter 5 nVidia nForce4 RAID Setup
Enabled
Auto
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
72
Item Help
Item Help