SOLTEK NF4-754RL Manual page 77

SL-NF4-754RL
(11) On the next screen, press Enter on the marked-up item to continue.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press
ESC to return to the previous screen.
S=Specify Additional Device
(12) Next screen will show that you have chosen two device drivers to
set up. Press Enter to continue, and the Installation Program will
then guide you through the rest of system setup.
Windows Setup
Setup will load support for the following mass storage driver(s):
NVIDIA RAID CLASS DRIVER
NVIDIA NFORCE STORAGE CONTROLLER
* To specify additional SCSI adapters, CD-ROM drives, or
special disk controllers for use with Windows, including
those for which you have a device support disk from a
mass storage device manufacturer, press S.
* If you do not have any device support disks from a mass
storage device manufacturer, or do not want to specify
additional mass storage devices for use with Windows,
press ENTER.
S=Specify Additional Device
(13) When the system is completely installed, the RAID driver will also
be installed into the system.
Chapter 5 nVidia nForce4 RAID Setup
NVIDIA RAID CLASS DRIVER
NVIDIA NForce Storage Controllerr
Enter=Continue
Enter=Continue
80
F3=Exit
F3=Exit