Other Connectors Configuration; 2-9.1 On-Board Fan Connectors - SOLTEK NF4-754RL Manual

SL-NF4-754RL

2-9 Other Connectors Configuration

This section lists out all connectors configurations for users' reference.

2-9.1 On-board FAN Connectors

PS/2
JKB1
Mouse
DIMM2
1
PS/2 Keyboard
S/PDIF
Out
DIMM1
+12V Power
Connector
ATX1
USB Port
USB Port
RJ45
USB Port
USB Port
PHY
RTL
8201CL
JAUD1
CD-IN
PCIE3 (PCI Express-x1)
1
1
ALC
850
PCIE2 (PCI Express-x1)
ALC850
PCIE1 (PCI Express-x1)
Winbond
83627HF
PCIX1 (PCI Express -x16)
RT2
All FAN1, FAN2 and FAN3 are Sensor Fan Connectors supporting
CPU/Add-on-card/System cooling fan with +12V mode. A Hardware
Monitor chipset is on board, with which users can install a Hardware
Monitor Utility and read the fan speed transmitted from the sensor fan.
Otherwise, users can read the fan speed from the "Hardware Monitor
Status" via BIOS.
A running Fan will send out 2 electric pulses per rotation of its fan
blade. A Sensor Fan Connector will count the electric pulses and send
the information to the System Hardware Monitor which in turn will work
out the fan rotation speed and display it on screen.
LED1
DDR 400/333MHz
nVidia
nForce 4
CK804
PCI1
FD1
Li
PCI2
Battery
J1
1
USB4 USB5
USB3
1 1 1 1
Sensor
+12V
GND
PW1
Sensor Conn.
IDE2 IDE1
SATA4
SATA3
SATA2
SATA1
BIOS
JBAT1
NJ1
1
HD IR PWR
SPK RST PLED
24
Chapter 2 Hardware Setup
+12V
GND
No Sensor
FAN2, sensor Fan Connector
(Yellow)
FAN3, Sensor Fan Connector
(Yellow)
FAN1, sensor Fan Connector
(Yellow)
Void