Enable Sata Raid In System Bios (Vt8237) - SOLTEK SL-KT880E-GR Manual

SL-KT880E-GR/RL/R

5-1 Enable SATA RAID in System BIOS (VT8237)

Mouse JKB1
(on top)
1
PS/2 Keyboard (underside)
Fan1
USB0
(port)
USB1 (port)
Main Power
+12V Power
RJ45
(on top)
USB2
(port) 1 1
USB3
(port)
1
JAUD1
VIA
VT6122
or
VT6103
1
CD-In1
VIA
PCI 1
VT1617
RT2 PCI 2
LPC I/O
PCI 3
IT8705
PCI 4
BIOS
PCI 5
WOL1
(Optional)
K T 8 8 0 E - R / R L / G R
K T 8 8 0 E - R / R L / G R
To enable SATA RAID controller, boot the KT880E-R/RL/RG system
and watch for the following initial screen to appear:
VIA Technologies, Inc. VIA VT8237 Serial RAID BIOS Setting Utility
V2.10 Copyright (C) VIA Technologies, Inc. All right reserved.
Scan Devices, Please wait ....
Press < Tab > key into User Window!
Channel 0 Master: ST380023AS
Channel 1 Master: ST380023AS
(The above message indicates that the SATA hard disks on board are
detected by the RAID BIOS.)
As soon as the above screen appears, press < Delete > key
<Tab> key) to enter CMOS BIOS Setup. Choose "Advanced Chipset
<Tab> key)
Features" and "South Bridge VIA VT8237 configuration". As soon as
you click on the "OnBoard SATA-IDE", choose "RAID" so as to enable
the SATA RAID interface.
South Bridge VIA VT8237 configuration:
To press< Enter > on South Bridge VIA VT8237 configuration will re-
veal the following item(s).
OnChip SATA-IDE To enable/disable the onchip SATA RAID
RT1
1
VIA
KT880
Fan4
AGP 8X/4X
IDE2 IDE1
VIA
VT8237
1 1
Fan3
Li
Battery
NJ1
JBAT1
FDD1
Header USB2 Header USB3 1
Fan2
1 1 1
interface.
84
Chipset VT8237 supporting
SATA RAID Interfaces.
2 SATA connectors supporting 2
SATA Hard Disks for RAID mode.
(not the
(not the