To Install "Nvidia Nforce4 All-In-1 Driver - SOLTEK NF4-754RL Manual

SL-NF4-754RL

3-3 To Install "nVIDIA nForce4 All-in-1 Driver"

1. Before opening the Support CD, please update Windows 2000 or
Windows XP with the latest Service Pack. Otherwise, the installation
of USB2.0 driver will not take effect.
2. Following the procedures of opening the Support CD, click to " Install
nVIDIA nForce4 All-in-1 Driver" to proceed.
3.The nVIDIA InstallShield Wizard will pop up to guide you to set up
nForce4 Drivers. This All-in-1 Driver will first start to install System
Management Bus driver, and then nVidia Ethernet LAN driver , nVidia
IDE driver, and then Audio driver. Click on Next to continue.
4. After all the setup processes are finished, please restart your computer
by clicking on "Finish" so as to put the just installed drivers into effect.
Chapter 3 Software Setup
33