Configure The Raid Setup - SOLTEK NF4-754RL Manual

SL-NF4-754RL

5-4. Configure the RAID Setup

The RAID Mode Selection
There are four modes to choose - Striping (RAID 0), Mirroring (RAID 1),
Stripe Mirroring (RAID 0+1), Spanning (JBOD). To change to a different
RAID mode, press the arrow key up or down until the mode you want
appears in the screen.
The Striping Block Size Selection
Striping Block Size affects how data is arranged on the disk. It is
recommended to leave this value at default.
Create the New Array
1. Press tab key to Free Disks section.
2. Move the disks appearing in this block (the disks are enabled from
the IDE Function Setup of BIOS) to the Array Disks block by pressing
the right arrow key.
RAID Mode : Stripe Mirroring
Free Disks
Loc Disk Model
[F6] Back [F7] Finish [TAB] Navigate [
Press the Right Arrow to add all 4 Hard Disks Array Disks column for
Stripe Mirroring setup.
NVIDIA RAID Utility
- Define a New Array -
Name
[ ] Add
[ ] Del
Chapter 5 nVidia nForce4 RAID Setup
Jan 7 2004
Striping Block : Optimal
Array Disks
Loc Disk Model
0.0.M ST3120026AS
0.0.S ST3120026AS
2.1.M ST380023AS
2.0.M ST380023AS
] Select [ENTER] Popup
74
Name