Enable Sata-Raid Interface With System Bios - SOLTEK SL-85ERV4-R Manual

SL-85ERV4-R / 85ERV4-RL

5-2 Enable SATA-RAID Interface with System BIOS

(1) Boot system and watch for the following initial screen to appear:
VIA Technologies, Inc. VIA VT6420 RAID BIOS Setting Utility v (xxx)
Copyright (C) VIA Technologies, Inc. All right reserved.
Scan Devices, please wait ....
Press < Tab > key into User Windows!
Channel 0 Master: ST3120023AS
Channel 1 Master: ST380023AS
(The above message indicates that the SATA hard disks on board are
detected by the RAID BIOS.)
(2) As soon as the above screen appears, press < Delete > key (not the
<Tab> key) to enter CMOS BIOS Setup. Choose "Integrated
Peripheral" and "VIA OnChip PCI Device". As soon as you click on
the "VIA OnChip PCI Device", a list of events appears for you to
configure their values. Choose "Enabled" for the "OnChip SATA/RAID"
so as to enable the SATA RAID interface.
OnChip SATA/RAID
VIA-3058 AC97 Audio
VIA-3043 OnChip LAN
Onboard Lan Boot ROM
OnChip USB Controller
OnChip EHCI Controller
USB Keyboard Support
USB Mouse Support
USB Emulation
x USB Keyboard Support
x USB Mouse Support
SATA/RAID
Phoenix - AwardBIOS CMOS Setup Utility
VIA OnChip PCI Device
OnChip To enable/disable the South Bridge SATA/RAID
interface.
Chapter 5 VIA VT8237 RAID
Enabled
Auto
Enabled
Disabled
All Enabled
Enabled
Disabled
Disabled
Off
Disabled
Disabled
77
Item Help