Sata / Ide Connectors On B9A-Fgr; Enable Raid Function In The Bios - SOLTEK B9A-FGR Manual

SL-B9A-FGR

5-1. SATA / IDE connectors on B9A-FGR

SATA connectors SATA1 and
SATA2 by nFORCE3 250Gb
Chipset nFORCE3 250Gb supporting
SATA/PATA RAID Interfaces
IDE connectors IDE1 and
IDE2 by nFORCE3 250Gb

5-2. Enable RAID function in the BIOS

1. Start the system, press < Delete > key to enter BIOS Setup. Choose
"Integrated Peripherals" and select "IDE function Setup", then press
enter. The IDE function Setup windows appears.
IDE RAID
x IDE Channel0 Master RAID
x IDE Channel0 Slave RAID
x IDE Channel1 Master RAID
x IDE Channel1 Slave RAID
x SATA Primary Master RAID
x SATA Secondary Master RAID
2. Enable "IDE RAID" and enable the disks that you want to set as
RAID disks. ( If RAID 0+1 mode is to be set, please enable SATA drives.)
3. Then press F10 to save the change and exit the BIOS. The PC reboots.
Phoenix - AwardBIOS CMOS Setup Utility
IDE Function Setup
82
C-Media
CMI 8768
1
JAUD1
CICADA
SimpliPHY
CIS8201
VIA
VT6307S
SATA2
SATA1
NJ1
nVIDIA
nFORCE3
250 Gb
JBAT1
USB3
IDE2
USB4
1 1
J2
Fan3
IDE1
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
JKB1
Fan2
Winbond
W83627HF
FD1
+12V Power
Fan1
Main Power
Item Help