Enter The Nvraid Bios - SOLTEK NF4-754RL Manual

SL-NF4-754RL

5-3. Enter the NVRAID BIOS

1. Enter the RAID BIOS by pressing F10 when prompted after rebooting
the system.
2. The NVIDIA RAID Utility - Define A New Array windows appears.
RAID Mode : Stripe Mirroring
Free Disks
Loc Disk Model
0.0.M ST3120026AS
0.0.S ST3120026AS
2.1.M ST380023AS
2.0.M ST380023AS
[F6] Back [F7] Finish [TAB] Navigate [
4 free Hard Disks detected by RAID Utility
Definiton of New Array
Typically a system contains a controller and multiple channels, and each
channel has a slave and a master except for SATA drives.
The status of the new array lists the information as below:
1.0.M
M: Master S: Slave
Controller
Channel - Channel 0 stands
for Parallel ATA drives while
Channel 1 stands for Serial
ATA drives.
NVIDIA RAID Utility
- Define a New Array -
Name
[ ] Add
[ ] Del
0.0.M Channel 0, Controller 0, Master
0.0.S Channel 0, Controller 0, Slave
0.1.M Channel 0, Controller 1, Master
0.1.S Channel 0, Controller 1, Slave
Chapter 5 nVidia nForce4 RAID Setup
Jan 7 2004
Striping Block : Optimal
Array Disks
Loc Disk Model
] Select [ENTER] Popup
Parallel ATA
Serial ATA
1.0.M Channel 1, Controller 0, Master
1.1.M Channel 1, Controller 1, Master
73
Name