Fault Finding - Conformity Check - Renault Duster 2007 Manual

UCH
Vdiag No.: 09
NOTES
Parameter or status
Function
ET324
ET485
Lighting
control
ET084
ET083
UCH_V09_CCONF
MR-453-X79-80D000$060.mif
V1
LIGHTING
Fault finding – Conformity check
Only carry out this conformity check after a complete check using the diagnostic tool.
The values shown in this conformity check are given as a guide.
Test conditions: Engine stopped, ignition on.
SUB-FUNCTION: LIGHTING CONTROL
Checked or action
Side lights request
Hazard warning
lights signal
Right-hand
indicator request
Left-hand indicator
request
Display
and notes
"PRESENT"
or
"ABSENT"
"PRESENT"
or
"ABSENT"
"PRESENT"
or
"ABSENT"
"PRESENT"
or
"ABSENT"
80D-9
80D
Fault finding
In the event of an
inconsistency, apply the
interpretation of status ET324.
In the event of an
inconsistency, apply the
interpretation of status ET485.
In the event of an
inconsistency, apply the
interpretation of status ET084.
In the event of an
inconsistency, apply the
interpretation of status ET083.